How to automate 3D printing quotes for your business

If you run a 3D printing shop or service bureau and still quote by email or in a spreadsheet, you know the routine. A customer sends a file, someone opens it, works out a price, and writes back. Every file waits for a person, and the customer waits with it.

Automating 3D printing quotes fixes the wait without handing your pricing to a machine. Automation does not invent your prices. It applies the rates you already trust, the same way every time, and sends the jobs it should not price to a person.

This guide is a method in eight steps, from a one-page rate table to a live quote on your website. Five of the steps end with an AI prompt you can paste into ChatGPT, Claude, or any other assistant. Replace the [bracketed] parts with your own details.


What automated quoting means for a 3D printing shop

Automated quoting means a customer uploads a 3D model, picks a material and quantity, and gets a price built from rules your shop set. Nobody on your team has to open the file before the customer sees a number.

This is software your shop runs for its own customers. It is not the same as the places customers go to order a part. Xometry is a marketplace that assigns orders to partner manufacturers, and Sculpteo and Stratasys Direct are bureaus. This guide is for a shop automating its own quotes.

One limit is worth stating up front: a measurement of the file is not a production plan. Automation prices what it can measure from the model and what the buyer tells it. If the buyer leaves out a detail that changes the job, the price can't account for it.

AutoQuote3D, the example used in this guide, is built for additive manufacturing. It does not quote CNC or other subtractive work.

Step 1: Write down the rates you already use

A shop that cannot write its pricing on one page is not ready to automate. Software applies rules. It can't apply the ones you keep in your head.

Start with the simple method

The simple method is material cost times a markup for complexity and detail, plus support material, with post-processing charged separately. It is easy to write down, easy for a customer to follow, and easy for software to apply. For the math, the markup tiers, and how supports differ by technology, read how to price 3D prints.

Add the order-level rules

Per-part rates are only half of a quote. Write down the rules that apply to the whole order:

  • Minimum order value, so small jobs are still worth doing.
  • Setup or startup costs, for the fixed work of preparing a job.
  • Bulk discount tiers, for larger quantities.
  • Urgency or lead-time add-ons, for faster delivery.

AutoQuote3D supports all four. A minimum order fee can top up small jobs. Flat-fee or percentage add-ons per part or per order are a Service Bureau feature.

Machine time and packing density are optional depth, not a requirement. The FDM pricing guide, SLA pricing guide, and SLS and MJF pricing guide cover them by process.

AI prompt: Build a one-page rate table

I run a 3D printing shop and I want to put my pricing on one page so quoting software can apply it.

Ask me these questions one at a time, and wait for each answer:
1. Which processes do I run (FDM, SLA, SLS, MJF, metal)?
2. Which materials do I offer for each process, and what do I pay per kilogram or per liter?
3. What markup do I apply for complexity and detail?
4. How do I charge for support material?
5. Which post-processing options do I sell, and what does each one cost?
6. What are my minimum order value, setup cost, bulk discount tiers, and rush or lead-time charges?

Then build a rate table with one row per material and these columns: process, material, material cost, markup, support material rule, and notes. List post-processing and order-level rules in separate tables.

Use this method: material cost times markup, plus support material, with post-processing charged separately. Don't suggest prices for me. If I skip an answer, mark the cell "missing" and list every missing item at the end.

Step 2: Choose which jobs get an instant price

Don't try to automate every job on day one. Automate the repeatable jobs, and keep the rest with a person.

Good candidates

Start with the jobs your shop already prices the same way every time: standard materials, standard finishes, known printers, and modest quantities. If anyone on your team would quote the job the same way, software can quote it too.

Jobs to keep with a person

  • Jobs with incomplete specs.
  • Parts that need engineering review.
  • Custom finishing.
  • Very large orders.
  • Anything outside additive manufacturing.

A firm price on incomplete specs is a promise your shop may regret. When details are missing, a person should ask before anyone quotes.

The simplest way to keep a job type manual is to leave it out of the widget. If you don't offer a material or process online, customers can't get an instant price for it, and those jobs keep coming to you.

AI prompt: Sort jobs into instant quote or manual review

I want to decide which 3D printing jobs my shop can price automatically and which ones a person should still quote.

I'll paste a list of my last 20 to 30 jobs. Each line has the process, material, quantity, rough part size, finishing, price charged, and whether the quote needed back and forth with the customer.

Sort the jobs into three groups:
1. Instant quote: priced the same way every time, with complete specs.
2. Instant quote after a rule change: say which rule is missing.
3. Manual quote: say why, for example incomplete specs, engineering review, custom finishing, or work that isn't additive.

Then tell me what share of jobs falls in each group, which materials and processes I should offer online first, and which job types I should leave out of the online quote for now. Ask before you assume anything that isn't in my list.

Here are my jobs:
[paste jobs]

Step 3: Capture the inputs that change the price

An automated quote is only as good as its inputs. Some come from the file, some come from the buyer, and the ones that matter change with the process.

What comes from the file

The model gives the software its geometry. AutoQuote3D accepts STL, OBJ, STEP (.step and .stp), and 3MF files, up to 150 MB. STEP and 3MF files are converted automatically before pricing. To see this from the customer's side, read how customers get an instant price from an STL.

What the buyer chooses

The rest comes from the buyer: material, quantity, lead time, and any add-ons you offer. On Professional and Service Bureau, the widget can also show material photos, videos, and datasheets, and collect the buyer's name, phone, and company.

What changes by process

Each technology prices differently, so each needs its own inputs. AutoQuote3D gives each technology its own materials and pricing model. Technologies supported as of October 2026 are FDM/FFF, SLA, SLS, MJF, and metal (DMLS, SLM, and binder jet).

FDM. Price follows the filament a part uses, plus support material. AutoQuote3D slices the part on the server with PrusaSlicer to price it. It does not import a desktop slicer profile.

SLA (resin). Price follows the resin a part uses. Supports print in the same resin as the part, so they belong in the volume, and support removal and sanding are post-processing.

SLS and MJF (powder). Loose powder holds the parts up, so there is no support charge. Price follows the powder a part uses, including the fresh powder each build needs, and how well the part nests in a build.

Metal (DMLS, SLM, and binder jet). Machine time and post-processing carry more of the cost than on polymer processes, so a pure material markup is weakest here. AutoQuote3D quotes metal (DMLS, SLM, and binder jet) today.

Step 4: Set limits so bigger jobs come to you first

Instant checkout suits routine orders. Larger ones deserve a look before anyone pays.

Limits you set

In AutoQuote3D, the shop can set a maximum number of parts and a maximum price for instant checkout. One caps the total number of parts, counting quantities. The other caps the total part price before shipping and add-ons.

If an order goes past either limit, instant checkout is blocked and the buyer requests a quote instead, so you can review the order first. Shops can also set a minimum order price, and a minimum order fee can top up small jobs.

To choose your limits, start low. Look at your past orders, and pick limits that let routine orders check out while the largest ones come to you. Raise the limits as your confidence in the prices grows.

When a part cannot be priced automatically

There is also a fallback that you don't configure. A part goes to manual quote when it does not fit the configured printer, or when automatic pricing could not be completed. The widget can show "This part needs a manual quote."

AI prompt: Set instant checkout limits

Help me choose limits for instant checkout on my 3D printing quote form. My software lets me set a maximum number of parts and a maximum price for the parts in an order. Past either limit, the buyer has to request a quote and I review it first. I can also set a minimum order value.

I'll paste my past orders with quantity and order value. Using that data:
1. Show how my orders are spread by part count and by order value.
2. Suggest a maximum part count and a maximum price that let most routine orders check out instantly while the largest orders come to me first.
3. Tell me how many past orders would have gone to a quote request under those limits.
4. Suggest a minimum order value, and show how many past orders fall under it.
5. Give me a cautious option and a relaxed option, with the tradeoff for each.

Show your work so I can check the numbers. Don't guess at orders I didn't give you.

Here are my orders:
[paste orders]

If you want to try it with your own rates, you can set up your shop free without a card. AutoQuote3D is built for additive, with Service Bureau, Professional, and Starter plans. When you're ready to collect payments, your 14-day plan trial starts at checkout, and that step needs a card (pricing).

Step 5: Test on past jobs before customers see a price

Before any customer sees a number, pull a set of real past jobs across your materials and sizes. Run each file through the new setup and compare the price with what you actually charged.

Look for patterns, not single misses. Common ones:

  • Small parts priced too low.
  • Tall parts.
  • Parts with heavy support.
  • Multi-quantity orders.

Then check the edges on purpose: one job under your minimum order, one just over each limit, and one part too big for your printer. Each should land where you expect.

There is no standard for an acceptable difference between old and new prices. Set your own tolerance before you start, and when you find a pattern, fix the rule behind it rather than the price of one job.

Want to see what the buyer sees? Try a sample quote.

AI prompt: Back-test my rates on past jobs

I'm about to switch from quoting by hand to automated quotes for my 3D printing shop. Help me test the new prices against old jobs before customers see them.

Step 1: Help me pick a test set of 15 to 20 past jobs. It should cover every process and material I offer, small and large parts, single parts and batches, one job below my minimum order value, one job just over each of my instant checkout limits, and one part that is too large for my printers.

Step 2: Give me a table to fill in with these columns: job, process, material, quantity, price I charged, new automated price, difference in dollars, difference in percent, and notes.

Step 3: When I paste the completed table, find patterns. Tell me which materials, sizes, or quantities are priced too low or too high, and which single rule I should change first. After I change it, remind me to rerun the full set.

Don't tell me what an acceptable difference is. Ask me for my own tolerance first.

Step 6: Put the quote on your website

There are three ways to put an automated quote in front of customers: a hosted quote link, a button or link on your site, or an iframe widget embedded in a page. For the embed, your site builder must support custom HTML. Shopify, WordPress, Webflow, and custom sites all work.

On Shopify, a connected store can take payment as a draft order on that store's checkout. The order still lives in the AutoQuote3D dashboard, and AutoQuote3D does not replace Shopify tax, shipping, or discount apps. On WooCommerce, AutoQuote3D does not send quotes into a WooCommerce cart. Customers pay in the widget through Stripe.

Launch quietly. Share the hosted link with a few repeat customers before you put the quote in your main navigation.

AI prompt: Plan the quote widget rollout

Write a rollout plan for adding an instant 3D printing quote to my shop's website. I can share a hosted quote link, add a button or link to my site, or embed the quote form as an iframe.

My website runs on: [platform]
My main customers are: [describe]
My rates were tested on past jobs on: [date]

Give me a four-week plan:
Week 1: a private test with the hosted link, sent to a few repeat customers. Tell me what to ask them.
Week 2: a button on one page. Tell me which page and what the button should say.
Week 3: the embedded form on a dedicated quote page.
Week 4: a review of quote requests, manual quotes, and any prices I had to correct.

For each week, list what to check before moving on and what would make me pause. Also draft a short email telling existing customers they can now get a price online, and a short note for my team on how to handle quote requests that come in over my limits. Keep both plain and under 120 words.

Step 7: Take payment and move the order into production

A quote saves the most time when the customer can pay for it right away. In AutoQuote3D, payments run through Stripe. AutoQuote3D charges no transaction fee on customer payments. Stripe's own processing fees still apply.

Business buyers often need terms instead of a card. On Professional and Service Bureau, the shop can approve customers by email or domain, set net terms (14 days by default, up to 90), and let them pay by invoice with an optional PO number. The invoice is emailed automatically and the order starts right away.

Quotes become paid orders you can track (Quote, Paid, Printing, Shipped). For what happens after payment, see order management.

Step 8: Give one person ownership of the rates

Automated prices drift when nobody owns them. Material costs change, machines come and go, and so do finishing options. Name one person who owns rate changes.

Give that person a review rhythm, for example monthly, or whenever a material price changes. After any change, rerun the test set from Step 5.

Review quote requests and manual quotes regularly, too. If the same job type keeps landing there, either add it to the automated set or raise a limit.

Build it yourself or configure software

There are three honest routes to automated quoting:

  • Keep the spreadsheet. It works for rates, but customers still wait for a person.
  • Build a tool. A custom build means file parsing, geometry analysis, slicing for FDM, payments, and upkeep for as long as you run it.
  • Configure quoting software. You enter your rates and rules, and the software handles files, pricing, and checkout.

Several vendors sell quoting software to print shops, Phasio and AutoQuote3D among them. To weigh them side by side, compare quoting software. For what AutoQuote3D includes, see AutoQuote3D features.

You can also mix routes. AutoQuote3D has a public REST API and published OpenAPI on every plan, for shops that want to connect their own systems. See the REST API and OpenAPI.

If your shop also runs CNC, those jobs need another route, since AutoQuote3D quotes additive work only.

Quoting from Claude or ChatGPT

AutoQuote3D has an official Claude connector and an official ChatGPT app on every plan. It also works in Cursor, and the dashboard has built-in Action Chat. Add AutoQuote3D from Claude's connectors directory or from its ChatGPT app listing. You approve anything important. Setup is on the Claude connector and ChatGPT app page.

Frequently asked questions

How do you automate quotes for a 3D printing business?

Write down your rates for each material and process, decide which jobs can be priced without a person, set limits that send larger orders to a quote request, test on past jobs, then put the quote form on your website with payment attached.

What do I need before I automate 3D printing quotes?

A rate for each material, a markup rule for complexity and detail, a support material rule, separate post-processing prices, a minimum order value, and a decision on which jobs still need a person.

Which 3D printing jobs should not get an instant quote?

Jobs with incomplete specs, engineering review, custom finishing, or very large quantities and values. In AutoQuote3D, an order past your part or price limit becomes a quote request, and a part that can't be priced automatically shows as needing a manual quote.

What happens when an order is over the limit I set?

Instant checkout is blocked and the buyer requests a quote, so you can review the order first.

Which 3D printing processes can be quoted automatically?

AutoQuote3D supports FDM/FFF, SLA, SLS, MJF, and metal (DMLS, SLM, binder jet), each with its own materials and pricing model (technologies supported as of October 2026).

Does AutoQuote3D quote CNC machining?

No. AutoQuote3D is built for additive manufacturing and doesn't quote CNC or other subtractive work.

Which file types can customers upload?

STL, OBJ, STEP, and 3MF, up to 150 MB. STEP and 3MF files are converted automatically before pricing.

What does AutoQuote3D cost?

Service Bureau is $175 a month, Professional is $50, and Starter is $25. There's also a Custom tier for shops running more than two locations, arranged through Shop3D.ca. Setup is free with no card, and buyers can create up to 15 quotes per calendar month before you choose a plan. A 14-day plan trial starts at checkout and needs a payment method.